Possible causes and solutions for the shaft seal leakage of the burner oil pump The possible causes of the shaft seal leakage of the burner oil pump are as follows: 1. The pump pump characteristics are improperly matched, causing the pump to vibrate, evacuate, and cavitation causing the shaft seal to leak. 2. The motor shaft is not the same as the pump shaft. 3. The coupling elastic pad is damaged. Possible causes and solutions for shaft seal leakage of burner oil pump failures The possible causes of shaft seal leakage of burner oil pump are as follows:
1. The pump pump characteristics are not properly matched, causing the pump to vibrate, evacuate, and cavitation causing the shaft seal to leak.
2. The motor shaft is not the same as the pump shaft.
3. The coupling elastic pad is damaged.
4. The oil is too dirty or the oil chamber is in the slurry.
5. The bearing bead frame is worn or broken.
Needle Bobang has the following solutions for the above possible reasons
1. Adjust the characteristics of the tube pump to make a reasonable match.
2. Adjust the two-axis concentricity.
3. Replace the new elastic pad.
4. Replace the new oil to prevent the oil chamber from entering the slurry.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Smart Home cellular Blinds

Sheer Cellular Blinds,Remote Control Honeycomb Blinds,Sound Absorption Cellular Shades,Skylight Window Cellular Shades

Shenzhen Yuaneng Industrial Co.,Ltd , https://www.bi-colour.com